How does Motorda Oil Burn?
Let’s first look at how fat burning works. The engine oil is located in the engine at the bottom of the pistons. The main task of engine oil is to make the pistons slippery and move more easily. At the top of the pistons is a fuel-air mixture. If the oil under the pistons comes out from the top and mixes with the fuel-air mixture, the oil starts burning.
Why Does Fat Burning?
The most common cause of fat burning in the motor is the relaxation of the segments. The segments are located at the end portions of the engine pistons and prevent oil from escaping from the side portions of the segments. Even in the worst looseness in the seg- ments, it easily rises to the combustion chamber and burns here.
If the rings are intact, the ahi can reach up to the combustion chamber in some cases. Obviously such a situation is not often observed. However, when the engine is running at very high speeds, the segments may not be fully efficient. Moreover, the situation we are talking about is just one of the damages of using it at high ages.
In addition, if there is a fault in the parts of the intake valves other than the rings, the oil may escape into this part and be sprayed into the combustion chamber. The result is again that the engine burns fat.
Because of a breakdown in the turbo system, the engine oil may be escaping. In this case the oil burns in the exhaust rather than in the engine.
Additionally; If the engine oil is missing at any time, there may be wear on the piston edges due to friction in the pistons. Then, when the missing oil is replaced, the pistons will leak oil again and burn the engine oil.
Is It Useful To Use Additives Against Engine Oil Burning?
There is no motive oil burning due to the engine oil itself or the lack of a substance in the oil. The fat burning of the motor occurs when the fat is passed from one place to another due to physical reasons. This means that the additives do not have any effect on the engine oil burning.
How to Understand Oil Reduction in the Vehicle?
The oil level of the engine can be easily understood from the oil stain on the bar showing the oil level there by lifting the bonnet. However, if the build level can not be controlled for any reason, the oil indicator of the vehicle must be checked, especially on slopes. If the light of the oil indicator flashes on the slopes, then the motive oil is diminished.
When should the engine oil burn normally be met?
No matter how well a vehicle is used and how much it is maintained, after 500,000 km, the vehicle’s engine is now outdated. In this case, the vehicle should now be burned normally.
However, especially if the newly produced vehicles have begun to burn fat without reaching 300,000 km, then there is a malfunction in the vehicle.
If the vehicle is between 20 and 30 years old, it is normal for these vehicles to begin to burn fat after 100,000 km.
How often should Engine Oil be replaced?
How often the vehicle needs to change its oil varies from vehicle to model, even from model to model. However, in general, it is normal for the vehicle to consume 500 to 1500 gr of oil at 1000 km. However, the steady state of the oil use of the vehicle indicates the stability of the vehicle, otherwise it indicates a malfunction in the vehicle. For example, a vehicle that consumes 500 grams of oil in the first 1000 kilometers is expected to consume 500 grams of oil in the next 1000 kilometers. If the oil consumption of the car constantly changes, there may be a malfunction in the vehicle.
What happens if oil is not added to the oil?
We said that the main task of the oil was to move the pistons more easily. Therefore, if the oil level of the vehicle decreases, the friction in the pistons increases and the pistons may be damaged. Material damage to the motor can occur.
A little known about engine oil is the contribution of engine oil to the cooling of the engine. Engine oil is 25 to 30% effective in reducing engine temperature.